Description
The Tuff Stuff Delta Roof top tent has been designed exactly the same as the Ranger overland tent, but without the additional overhang over the ladder area. By eliminating the entry overhang & annex room, this will allow the tent to be mounted at even lower heights (waist to chest level), without having to duck under the overhang. By having a front entry, this makes the Delta Rooftop Tent best suited for mounting to pickup truck beds, 4X4 travel trailers or smaller SUV/Crossover vehicles where the roof rack is below head height.
WILL THIS FIT MY VEHICLE?:
Rooftop tents are NOT VEHICLE SPECIFIC. No rooftop tent is compatible with any one type of vehicle. It is up to you to provide a stable roof rack that can support the weight of the tent on top, in addition to the people inside. Heavy-duty crossbars (left to right) are necessary to support the weight of the tent, and we recommend checking your factory rail system (front to back) to confirm it will hold the weight of your tent and the people inside. Max width of your crossbar should be 3.25" or less so there are no modifications needed to use the provided brackets.
Instructions
Install time is approx 1-2 hours with 2 people. Detailed instructions included.
All necessary spikes included.
All necessary hardware included (even the tools) to mount to most all roof racks (using the custom extruded aluminum channel system).
Ideal mounting height for the tent would be 76?-78? above the ground to allow for the ladder to extend and annex to hang to the ground.
Tent mounts slide In the lower mounting rail to accommodate any crossbars (left to right on the vehicle) with a spread of up to 52". We recommend your crossbars (left to right) are no more than 45" apart for optimal support. The included lower brackets will accept up to a 3.25" wide crossbar- Crossbars wider than 3.25" will require new brackets to be fabricated. Please see photos of the provided mounting brackets for a better idea of what to expect.